Air sealing services in Victoria, TX - fewer drafts and a house that still breathes
Drafty rooms, a hot upstairs or a power bill that keeps climbing? We find the gaps, seal them and leave the right vents open.
- Fully licensed and insured.
- Free in-person estimates.
- We reply within 1 business day.
What does air sealing do for a drafty house in Victoria?
Air sealing services in Victoria, TX close the cracks and holes that let outside air into your house before any insulation goes in, so rooms stop feeling drafty and your heating and cooling don't have to work as hard to keep up.
Most of the leaks that matter aren't the ones you notice at the front door. They're up in the attic, around pipes, wires, light fixtures and the hatch, and they can also let in moisture that warps wood and leads to mold, which is why I'd recommend sealing them before adding any attic insulation. The price moves with how many openings there are, how much old insulation has to be pulled back to reach them, how easy the attic is to get into and whether adding insulation at the same time makes sense. The schedule turns on the same things, plus anything found up there that has to be fixed first, so your estimate lays out what I'd do and in what order.
How we handle air sealing on your house
I start by looking the whole attic over, because new sealing and insulation laid over old material that's soaked or full of droppings just keeps the problem in your house. Then our crew seals the gaps you can see, around the attic hatch, plumbing pipes, wiring and recessed can lights, and pulls the insulation back to hunt down the hidden ones underneath it. We leave open the vents that are meant to stay open, like the ones at the eaves, so the attic can still breathe, and when the insulation goes back we keep it even out to the edges instead of piled up in the middle.
Sealing is usually the first half of the job, and the right insulation comes after it. Where the ducts run through the attic, closed-cell foam insulation, a dense foam that also blocks moisture, is the option I'd look at first. The same kind of leaks show up where the house framing sits on the foundation, so on homes with a lower level we can look at basement insulation too.
Sealing only
This suits a house whose insulation is already dry, clean and deep enough. We seal the gaps and put the insulation back the way we found it, so you're paying only for the sealing.
Sealing plus a blown-in top-up
This is what I'd recommend for most attics, because closing the gaps and then adding blown-in insulation, loose fill blown through a hose, gets you most of what foam would for less money. It fits best where the ductwork doesn't run through the attic.
Foam at the roofline
Foam costs more, but it seals the air while it insulates, and that matters when the ductwork lives up in the attic. I'd only recommend it when that's the case.
If you see a wet spot on a ceiling or droppings in the attic, please call rather than wait, and we'll get back to you by phone or message.
What happens after you call us about air sealing?
Here's how a job runs from your first call to the day we leave. I explain each step before asking you to agree to anything, so you always know what comes next.
Call or send a request
Call (361) 363-1202 or use the form, and we'll get back to you to set a time for me to come out. It helps to tell us how you get into the attic, whether through a hall hatch or the garage.
I look the house over
I come out myself, check the attic, the hatch and what's under the old insulation, and write down what I found, what I'd do first and why. The price follows that list, so you can see what you're paying for and compare it fairly with other quotes.
Our crew seals the house
Once you say go and any permit question is settled, our crew does the work in the order on your estimate. Problems like wet or dirty insulation get sorted out before any sealing or new insulation goes in.
We walk the finished job
Before we leave, I walk the work with you and show you what was sealed and which vents were left open. Your satisfaction, guaranteed.
Get a written air sealing estimate for your house
Send the form and we'll reply within one business day, by phone or message, to set a time. I come out myself for the free in-person estimate, and there's no obligation to go ahead.
(361) 363-1202Air sealing permits and attics in Victoria, TX
Victoria's Development Center issues the permits needed for most construction inside the city limits, and its list names electrical, mechanical and remodel work but doesn't mention air sealing. That list alone doesn't settle whether your job needs one, so before we start I check with the office and tell you what they said. If a permit is needed, we sort out with you who applies, and we don't begin until it's in place. We're fully licensed and insured.
In older homes around Victoria we often find attic hatches with nothing sealing the edges and insulation that's settled thin along the eaves. We see the same thing on jobs in Port Lavaca and Edna, and we fix it the same way, sealing first and evening out the coverage after.
Air sealing questions from Victoria homeowners
Can I seal air leaks in my house myself?
You can handle the obvious leaks yourself, like gaps around door frames and the openings where pipes, vents and wires pass through outside walls. The small, hard-to-find leaks are another matter, especially in an attic where layers of insulation cover them, and that's where I'd recommend having a professional find them.
How much can air sealing save on my power bill?
ENERGY STAR says sealing air leaks and adding insulation can save up to 10% on yearly energy bills and make the house more comfortable. That figure is for the two done together, so if your attic needs both, I'd recommend planning them as one job.
Can the AEP Texas program lower the cost of air sealing?
It can, if you're an AEP Texas residential customer and the program still has funding, since most measures may be provided at low or no cost. Eligible work includes weather-stripping doors, sealing plumbing openings and sealing attic hatches, and the utility pays its incentive straight to the participating contractor. You start by reaching out to an approved contractor, and you can read the details on the AEP Texas program page.
Is air sealing safe in a house with a gas furnace or water heater?
Yes, as long as the job leaves room for proper ventilation. A gas appliance that runs short of air works poorly and may give off carbon monoxide, and a house without enough fresh air can build up moisture and harmful gases. That's why I note everything that burns fuel before we close anything up, and you're welcome to ask me what I checked.
How do I find hidden air leaks in my attic?
Certified home energy assessors find them with a blower door test, a fan set in a doorway that pulls air through the house so leaks show, and an infrared camera that picks up hot and cold spots. They can also tell how well the house is ventilated. When I come out, I check the usual trouble spots by hand, under the insulation around the hatch, pipes, wires and lights.
What is the best way to get an attic ready for air sealing?
The best way is to have the attic checked first for live knob and tube wiring, vermiculite, an older pebbly loose fill, bathroom fans venting into the attic and roof leaks. Each of those needs to be dealt with before anything gets sealed, so they go at the top of the list on your estimate.
Related insulation work that pairs with air sealing
If the floors over a basement stay cold or the rim along the foundation feels drafty, insulating those walls finishes what sealing the gaps starts.
When the ductwork runs through the attic, closed-cell foam at the roofline seals and insulates at once, and keeps your ducts out of the attic heat.
Book your air sealing estimate today
Call (361) 363-1202 or send a request with your address, anything stored in the attic and any roof or wiring problems you know of, since stored items may need moving before we can reach the leaks.